Terre Expose Wall Textures Manufacturer, Supplier in Ahmedabad

A copolymer emulsion base special wall texture. Available in any in-built colour and a variety of designs as per client’s requirement.

Providing and applying 1.5mm-2.5mm thick ‘Terre Expose’ plaster made of copolymer binders and fine marble powder of Earthen/Coral spectrum, as per the required design and pattern approved by the architect/engineer in-charge on 1 coat of base primer of Earthen/Coral spectrum.

Above application is to be carried out on the single/double coat smooth mala plaster.

Formulation

Raw Material

Various sized marble powder, copolymer emulsion, cellulose thickener, additives, biocides, water.

Process

Water and cellulose thickeners are added in the mixer with additives; following which, emulsions are added with various sized marble powder. The contents are then allowed to mix for a calculated time period per batch size. Biocides are added as a part of the process for anti-fungal, anti-algae properties. Quality standards are checked for the batch and material is released through the valve for packaging.

APPLICATION METHODOLOGY

  • Application Tool : Steel trowel + sponge
  • Thinner : Water

It may vary with surface condition and application method, film thickness applied

  • Packing : 65 sq.ft. to 75 sq.ft./ 25kg bag
  • Mixing Ratio : maximum 1%-2%

Application

  • Surface must be cleaned of chalk and debris.
  • A base coat of primer of relevant colour is applied on the plastered surface using a roller or a brush.
  • The material is applied using a trowel to get the required design. Water can be added in for easier application depending on the requirement.
  • Drying time is usually between 8hrs to 24hrs depending upon the weather conditions

ASSOCIATED PRODUCTS

In the collectionTERRE EXPOSE (MS 01 from master shade card)

TE-1001

TE-1002

TE-1003

TE-1004

TE-1005

TE-1006

TE-1007

TE-1008

TE-1009