Cement Putty Manufacturer in Ahmedabad, Cement Wall Putty

Cement Putty      

A white cement based powder putty

Used in interior and exterior plaster surfaces.

SPECIFICATION

PROVIDING AND APPLYING 0.8-1.0MM THICK 'TERRE PALETTE' CEMENT PUTTYMADE OF WHITE CEMENT AND FINE NATURAL MARBLE POWDERS OF (EARTHEN , CORAL , SPECTRUM ) AS PER THE REQUIRED DESIGN AND PATTERN (APPROVED BY THE ARCHITECT/ENGINEER IN CHARGE ). ABOVE APPLICATION TO BE CARRIED OUT ON THE BASE OF SINGLE COAT / DOUBLE COAT SMOOTH MALA PLASTER.

Formulation

Raw Material

Various sized powders, white cement, cellulose thickeners, additives.

Process

White cement, cellulose thickeners are added in the mixer with additives, following which various size marble powders are added. The contents are then allowed to mix for a calculated time period per batch size. Quality standards are checked for the batch and material is release through the valve for packaging.

APPLICATION METHODOLOGY


  • Application Tool : Putty Knife
  • Thinner : Water
  • Coverage / Bag : 300 to 400Sq.ft./ 20 kg bag
  • Mixing Ratio : 40% maximum

It may vary with surface condition & application method, film thickness applied.

APPLICATION

Surface must be cleaned of chalk and debris.

The material is applied using a putty knife, water can be added in for easier application depending on the requirement.

Drying time is usually between 8-24 hours depending on weather conditions.