click on it
A copolymer emulsion base special wall texture.
Available in any in-built colour and a variety of designs as per client’s requirement.
PROVIDING AND APPLYING 1-1.5MM THICK 'TERRE PALETTE' SUPERFINE PLASTER MADE OF COPOLYMER BINDERS AND FINE NATURAL MARBLE POWDERS OF (EARTHEN , CORAL , SPECTRUM ) AS PER THE REQUIRED DESIGN AND PATTERN (APPROVED BY THE ARCHITECT/ENGINEER IN CHARGE ) ON 1 COAT OF BASE PRIMER OF (EARTHEN , CORAL , SPECTRUM ). ABOVE APPLICATION TO BE CARRIED OUT ON THE BASE OF SINGLE COAT / DOUBLE COAT SMOOTH MALA PLASTER.
Various sized marble powders, copolymer emulsions, cellulose thickeners, additives, biocides and water.
Water and cellulose thickeners are added in the mixer with additives, following which emulsions are added with various size marble powders. The contents are then allowed to mix for a calculated time period per batch size. Biocides are added as part of the process for anti-fungal, anti-algae properties. Quality standards are checked for the batch and material is release through the valve for packaging.
- Application Tool : Roller
- Thinner : Water
- Coverage / Bag : 130 to 140Sq.ft./ 25 kg bag
- Mixing Ratio : 1-2 % maximum
It may vary with surface condition & application method, film thickness applied.
Surface must be cleaned of chalk and debris.
A base coat of primer of relevant colour is applied on the plastered surface using a roller or brush.
The material is applied using a steel trowel and steel comb to get the required design, water can be added in for easier application depending on the requirement.
Drying time is usually between 8-24 hours depending on weather conditions.