Best Primer Manufacturers & Suppliers in India, Ahmedabad

PRIMER      

A copolymer emulsion base colour.Available in any in-built colour.

SPECIFICATION

Providing and applying 20 microns thick 'Terre Palette' Primer made of copolymer binders and fine natural marble powders of Earthen as per the required design and pattern (approved by the architect / engineer in charge). Above application to be carried out on the base of single coat / double coat smooth mala plaster.

Formulation

Raw Material

Various sized marble powders, copolymer emulsions, cellulose thickeners, additives, biocides and water.

Process

Water and cellulose thickeners are added in the mixer with additives, following which emulsions are added with various size marble powders. The contents are then allowed to mix for a calculated time period per batch size. Biocides are added as part of the process for anti-fungal, anti-algae properties. Quality standards are checked for the batch and material is release through the valve for packaging.

APPLICATION METHODOLOGY

  • Application Tool : ROLLER / BRUSH
  • Thinner : WATER

It may vary with surface condition & application method, film thickness applied

  • Packing : 1500 to 1600Sq.ft./ 20 kg bag
  • Mixing Ratio : 1-2 % maximum

APPLICATION METHODOLOGY

Surface must be cleaned of chalk and debris.

A base coat of primer of relevant colour is applied on the plastered surface using a roller or brush.

The material is applied using a roller or brush to get the required design, water can be added in for easier application depending on the requirement.

Drying time is usually between 8-24 hours depending on weather conditions.

PRIMER      

A copolymer emulsion base colour.Available in any in-built colour.

SPECIFICATION

Providing and applying 20 microns thick 'Terre Palette' Primer made of copolymer binders and fine natural marble powders of Earthen as per the required design and pattern (approved by the architect / engineer in charge). Above application to be carried out on the base of single coat / double coat smooth mala plaster.

Formulation

Raw Material

Various sized marble powders, copolymer emulsions, cellulose thickeners, additives, biocides and water.

Process

Water and cellulose thickeners are added in the mixer with additives, following which emulsions are added with various size marble powders. The contents are then allowed to mix for a calculated time period per batch size. Biocides are added as part of the process for anti-fungal, anti-algae properties. Quality standards are checked for the batch and material is release through the valve for packaging.

APPLICATION METHODOLOGY

  • Application Tool : ROLLER / BRUSH
  • Thinner : WATER

It may vary with surface condition & application method, film thickness applied

  • Packing : 1500 to 1600Sq.ft./ 20 kg bag
  • Mixing Ratio : 1-2 % maximum

APPLICATION METHODOLOGY

Surface must be cleaned of chalk and debris.

A base coat of primer of relevant colour is applied on the plastered surface using a roller or brush.

The material is applied using a roller or brush to get the required design, water can be added in for easier application depending on the requirement.

Drying time is usually between 8-24 hours depending on weather conditions.